Gold plating is a method of depositing a thin layer of gold onto the surface of another metal, ... Bright hard gold on contacts, with Knoop hardness between 120-300 and purity of 99.7-99.9% ...

Copper plating is an electro-chemical process, in which a layer of copper is deposited on the metallic surface of a solid through the use of electric current. Copper plating is an important process because: It provides valuable corrosion protection. It improves wear resistance of the surface.

Our organization is offering an assorted range of Bright Black Nickel Plating. These services are rendered by using high-quality nickel and modern technology tools. Apart from this, our professionals make genuine efforts to provide this plating service within the promised set of time span. Other details: High flexibility Quick execution of services Executed by experienced employee Perfect work

Copper plating is an electro-chemical process, in which a layer of copper is deposited on the metallic surface of a solid through the use of electric current. Copper plating is an important process because: It provides valuable corrosion protection. It improves wear resistance of the surface.

Black Nickel is electrolytic nickel plating with a secondary treatment to turn the surface black. This plating will provide corrosion resistance and maintain electrical conductivity while reducing reflectivity on the surface. Performance Benefits Low Reflectivity Corrosion Resistance Good Conductivity Decorative

Dull Brass Plating Service. We are a company offering Brass Plating Service of top quality for our clients. The rich quality material used for plating is achieved from the most trusted and authenticated resources in the industry. We take immense efforts and try to more.

Brass Plating. the application to the surfaces of metal objects (mainly steel) of a layer of brass several microns thick and consisting, for example, of 70 percent copper and 30 percent zinc. The coating is usually applied electrolytically by deposition of brass from an electroplating bath.

The Dull Nickel Plating offered is done through a variety of mechanisms. It is performed to keep the parts free from corrosion. It is resistant to acid as well. It is done to give parts a shiny look. It can be done to small machinery parts as well. The coating is done with a lot of precision. 

Our company is engaged in manufacturing and exporting of a wide range of Copper Plating Services, which adds durability and strength to the materials. These are catering to the requirements of diverse industries such as architectural, auto, camping and hunting and collars/coupling industry. Our services are renowned for fine finishing, non-uniformity and extra shine.
Copper plating process: Copper plating is the process of coating of a material with copper by an electrolytic process, to reduce corrosion. There are three types of processes: acid, alkaline non-cyanide, and cyanide.
Benefits of EPI’s copper plating chemicals:
Non-Cyanide Alkaline Copper Plating
Products Available: E-Brite Ultra Cu, E-Brite 30/30, E-Brite 20/20)

1. Outstanding Adhesion
2. Formulated for zinc die cast
3. Large operating window

We are one of the leading service providers including Silver Plating Service of impeccable quality. We use high end electro deposit technologies to offer excellent contact characteristics, superior solder able surfaces, and high electrical and thermal conductivity. We ensure rigid quality controls for providing Silver Plating Service in our state-of-the-art facilities. Our clients are also offered selective plating on continuous strip material as well as complete plating. Silver Plating Service is extensively used in chemical, food, pharmaceutical, textile industries, and many other sectors. We also offer silver plating and other services as per our client's specifications at affordable prices.

Features of Silver Plating Service:

1. 99.9% purity of plating
2. Wear resistant
3. Flawless finish
4. Corrosion resistant
5. Abrasion resistant

We provide CED Coating Services in reasonable range. CED coating services for general industrial equipments, which provides protection to equipments like steel furniture and office equipment, lampshades and bicycles against rusting.

Features:

Extremely high corrosion protection. A 20 micron dry film thickness can withstand as much as 1000 hours salt spray test ASTM B117.

Able to coat highly recessed area.

Able to coat complex shapes with a very high degree of accuracy and repeatability.

transfer efficiency of more than 95% reduced paint wastage.

Water- based technology eliminates risk of fire and reduces air and water pollution.

Freshly deposited film is insoluble in water, permitting complete rinsing and recovery of dragged out material.Uncured paint is dry enough to allow careful handling.Unlike spray coatings, CED paint does not sag during curing.

Glass Bead Blasting is a general term used to describe the act of propelling very fine bits of material at high-velocity to clean or etch a surface. Glass used to be the most commonly used material, but since the lung disease silicosis is caused by extended inhalation of the dust created by glass, other materials are now used in its place. Any small, relatively uniform particles will work, such as steel grit, copper slag, walnut shells, powdered abrasives, even bits of coconut shell. Due to the dangers of inhaling dust during the process, sandblasting is carefully controlled, using an alternate air supply, protective wear, and proper ventilation.

A Glass Bead Blasting setup usually consists of three different parts: the abrasive itself, an air compressor, and a blaster nozzle. For etching and small object cleaning, a workstation to hold the piece of glass is also needed, as is some sort of collector to gather up excess dust. Glass Bead Blasting is primarily used for two somewhat different applications. The first of these is to clean a surface of anything that may be clinging to it. The second is to either etch or carve designs or words into glass or a similar material.

Brass knobs, hinges and ornamental fixtures offer the look and feel of quality when they are clean and tarnish-free. Unfortunately, the lacquer applied to shiny brass objects yellows over the years and the brass beneath tarnishes, although much more slowly than it would without the protective lacquer. As long as the lacquer remains, it is impossible to polish the brass. This is also known as Elctro Lacquer.

Our clients can avail impeccable quality Tin Plating Service from us. Our ultra modern electro processing technology used in Tin Plating Service ensures excellent solderability, corrosion resistance and prevents galling of metal surfaces. Tin plating imparts softness and ductility during the stamping process. We maintain rigid quality controls in modern manufacturing facilities. We offer selective as well as complete Tin Plating Service as per our client's requirements. Our services are extensively used in chemical, food, pharmaceutical, textile industries and many other sectors.

Features of Tin Plating Service:  

1. 99% purity of plating
2. Seamless finish
3. Cost effective
4. Abrasion resistant
5. Corrosion proof

Our Brass Plating Services are offered using technically advanced range of machines to produce a glossy as well as polished brass color. We make use of optimum quality brass and ensure no poor color, oxidized finishes and non uniformity is offered. After plating, parts are coated with specially prepared water-based acrylic lacquer that prevents them from tarnishing.

Features of Brass Plating Services:  

1. E-Brite B-150 is a conventional cyanide plating process
2. It plates twice as fast as any other cyanide brass process
3. It is a single additive process with excellent throwing power that produces a lustrous, highly desirable yellow-green, 70/30 brass color
4. It is a low temperature process operating at 105° F and can be used in both rack and barrel operations

Chrome is plated over bright nickel where a hard, decorative finish is desired. The chrome provides surface hardness while the nickel provides luster. The combination has good corrosion protection and excellent wear resistance. It is used for a variety of parts in the automotive, motorcycle, furniture, plumbing, lighting and many other industries.

We are a highly praised name engaged in presenting our valuable patrons an advanced quality range of Coating Lacquer. Our offered Coating Lacquers are developed at our highly developed manufacturing unit under the direction of highly capable and knowledgeable professionals. Tested against various quality parameters, these Coating Lacquers are mainly used in numerous industries for various purposes. We offer our quality-approved Coating Lacquers as per the specifications of the patrons at market leading prices.